FPL1007 Rohde & Schwarz

Analizzatori spettro Rohde Schwarz serie FPL1000

FPL1007 Rohde & Schwarz

15010
Analizzatore di spettro 7.5GHz senza TG Richiedi prezzo promozionale
Quantità
FPL1007 Rohde & Schwarz

FPL1007 R&S

Analizzatore di Spettro 5KHz...7.5GHz, risoluzione 1Hz, DANL -141dBm (-161dBm con preamplificatore opzionale). Combines the functionality of a benchtop analyzer with the portability of a handheld instrument •5 kHz to 7.5 GHz •Intuitive touchscreen •Solid RF performance •Innovative signal analysis options •Meets current wireless or cellular standards •Supports frequency sweep and zero span, ACLR, C/N, C/N0, OBW, harmonic distortion, TOI and many marker functions •Compatible with R&S® VSE Vector Signal Explorer software •Large display: 10.1" screen with 1280 x 800 pixel resolution •Lower weight/smaller footprint •Portable operation: 12/24 V power and three hours of battery operation (w/ optional FPL1-B31) One instrument for multiple applications You can use the R&S®FPL1000 Spectrum Analyzer for spectral measurements, for highly accurate power measurements with power sensors and for analyzing analog and digitally modulated signals. The FPL1000 supports the most common spectrum measurements like frequency sweep and zero span, ACLR, C/N, C/N0, OBW, harmonic distortion, TOI and many marker functions. For power measurements with power sensors, use option FPL1-K9. For analog demodulation, option FPL1-K7 is available. For the analysis of digitally modulated signals, the FPL1000 can be used with the VSE Vector Signal Explorer software. which can be installed on the FPL1000 or on an external PC. The options VSE-K70 (VSA) and VSE-K106 (NB-IoT) are supported with the FPL1000. When using the VSE, the official VSE SW license with the license dongle FSPC are required. The standard analysis bandwidth is 10 MHz with optional FPL1-B40 upgrade to 40 MHz. Third party software like Matlab can extract IQ data from the IQ-analyzer. For noise figure and gain measurements with an external noise source, R&S offers option FPL1-K30. Solid RF performance The analog performance of the FPL1000 is very close to the R&S®FSV. The FPL1000 features phase noise of –108 dBc (1 Hz) at 10 kHz offset (1 GHz carrier), a third-order intercept point of +20 dBm, 1 Hz to 10 MHz resolution bandwidth and –167 dBm displayed average noise level. The FPL1000 has an optional pre-amplifier with 20 dB gain (option FPL1-B22) and optional 1 dB attenuator steps (FPL1-B25) to extend the usable dynamic range and sensitivity. The specified low spurious response of -70 dBc up to 10 MHz offset and even -80 dBc at higher offsets is unique in this class. Intuitive user interface The user interface has everything that the high performance R&S®FSW can do like multiple tabs, multi view with sequencer and flexible arrangement of results display. The touchscreen supports swiping and zooming gestures. A one-finger swipe across the screen adjusts the center frequency or the reference level. Two-finger gestures adjust the displayed span or level range. Everything is displayed on a 10.1" screen with 1280 x 800 pixel resolution. Fully portable The FPL1000 is a fully portable instrument, as it weighs only 6 kg and has a top handle. The internal battery (option FPL1-B31) provides three hours of operation. The battery pack consists of two batteries; therefore, a hot swap is possible during operation. The battery charger R&S®FSV-B34 also charges FPL1000 batteries in case external charging is required. Otherwise, the batteries are charged through the standard AC power input or the optional 12/24 V power input. With the option FPL1-B30 12/24 V power the FPL1000 can be operated inside vehicles using the car's accessory socket. A padded transport bag FPL1-Z2 is also available. It has ventilation slits and a transparent cover and allows operating the instrument while inside the bag. For measurements where the instrument needs to be carried, such as interference hunting, the transport bag with the instrument inside can be carried with the shoulder harness option FPL1-Z3. The FPL1000 Spectrum Analyzer is well-suited for use in research, education, service and maintenance, general-purpose signal analysis and demodulation, basic function test and EMI debugging in R&D, IoT (Internet of things) R&D, verification and production and automated test or surveillance systems. Caratteristiche tecniche: - Tecnologia IF completamente digitale - Campo di frequenza: 5KHz...7.5GHz - Elevata sensibilità DANL (< -141 dBm (1 Hz), con preamplificatore opzionale < -161 dBm (1 Hz) - Banda di risoluzione da 10 Hz a 3 MHz - Tempo di sweep: 20ms....1000s - Purezza spettrale: 30KHz <-95dBc (1Hz) - 100KHz <-100dBc (1Hz) - 1MHz <-120dBc (1Hz) - Schermo 5.7” LCD TFT (640×480 pixel) - Interfacce: Standard USB Host/Device, LAN Opzioni FPL1-B10: GPIB Interface FPL1-B19: Second Hard Disk FPL1-B22: RF Preamplifier FPL1-B25: 1 dB Attenuator Steps FPL1-B30: DC Power Supply 12/24V FPL1-B31: Internal Li-Ion Battery Pack FPL1-B4: OCXO Frequency Reference FPL1-B40: 40MHz Analysis Bandwidth FPL1-B5: Additional Interfaces FPL1-K30: Noise Figure and Gain Measurements FPL1-K54: EMI Measurements FPL1-K7: Measurement Demodulator FPL1-K70: Vector Signal Analysis FPL1-K70M: Multi-Modulation Analysis FPL1-K70P: BER Measurements FPL1-K9: Power Sensor Support FPL1-Z1: Hard Cover FPL1-Z2: Transport Bag FPL1-Z3: Carrying Vest Holster FPL1-Z4: Lithium-Ion Battery Pack FPL1-Z6: Rack Mount Kit HE400UWB: UWB Antenna Module 30MHz to 6GHz VSE-K106: NB-IoT Measurements EUTRA/LTE NB-IoT Measurements (1320.7900.06) VSE-K70: Vector Signal Analysis VSE.06: VSE Base Software

Specifiche FPL1007 R&S

Caratteristiche tecniche: Tecnologia IF completamente digitale - Campo di frequenza: 9KHz...7.5GHz - Tracking Generator nelle versioni .13/.16 - Elevata sensibilità DANL (< -141 dBm (1 Hz), con preamplificatore opzionale < -161 dBm (1 Hz) - Banda di risoluzione da 10 Hz a 3 MHz - Tempo di sweep: 20ms....1000s - Purezza spettrale: 30KHz <-95dBc (1Hz) - 100KHz <-100dBc (1Hz) - 1MHz <-120dBc (1Hz) - Schermo 5.7” LCD TFT (640×480 pixel) - Interfacce: Standard USB Host/Device, LAN

FPL1000
CONTATTACI
Assistenza tecnica
In caso di malfunzionamento, se lo strumento è stato fornito dalla nostra azienda, contattaci per avere supporto tecnico.
Richiedi informazioni
Siamo a tua completa disposizione per ogni chiarimento tecnico o commerciale.